StopTech 07-08 Audi RS4 Replacement Right Drilled 325x22mm Aero Rotor
StopTech AeroRotor Replacement Kits ARK are designed to replace your vehicle's original factory rotors; while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors; it offers improved cooling; braking; and handling. The directional; floating AeroRotors allow independent expansion of the rotor and hat without "coning;" thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design; pre-assembled to billet aluminum AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80 percent more air than factory rotors for better cooling and reduced fade on the track. The aircraft-grade aluminum hats and 2-piece AeroRotors are up to 8 pounds lighter than stock rotors; allowing faster acceleration and deceleration; and improved handling. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat; friction material and debris; assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion; zinc finish is available for customers in cold climates; where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100 percent made in the USA.
Reduced Unsprung and Rotational Mass. Improved Thermal Capabilities. Optimized Heat Dissipation. Designed to Work with OE Calipers
Reduced Unsprung and Rotational Mass; Improved Thermal Capabilities; Optimized Heat Dissipation; Designed to Work with OE Calipers
What's Included:
- StopTech 07-08 Audi RS4 Replacement Right Drilled 325x22mm Aero Rotor
Vehicle Fitment:
- 2003 Audi RS6 Base
- 2007-2008 Audi RS4 Base
- 2008-2008 Audi RS4 Cabriolet
Product Information
Product Information
Shipping & Returns
Shipping & Returns
StopTech 07-08 Audi RS4 Replacement Right Drilled 325x22mm Aero Rotor
StopTech 07-08 Audi RS4 Replacement Right Drilled 325x22mm Aero Rotor
StopTech AeroRotor Replacement Kits ARK are designed to replace your vehicle's original factory rotors; while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors; it offers improved cooling; braking; and handling. The directional; floating AeroRotors allow independent expansion of the rotor and hat without "coning;" thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design; pre-assembled to billet aluminum AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80 percent more air than factory rotors for better cooling and reduced fade on the track. The aircraft-grade aluminum hats and 2-piece AeroRotors are up to 8 pounds lighter than stock rotors; allowing faster acceleration and deceleration; and improved handling. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat; friction material and debris; assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion; zinc finish is available for customers in cold climates; where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100 percent made in the USA.
Reduced Unsprung and Rotational Mass. Improved Thermal Capabilities. Optimized Heat Dissipation. Designed to Work with OE Calipers
Reduced Unsprung and Rotational Mass; Improved Thermal Capabilities; Optimized Heat Dissipation; Designed to Work with OE Calipers
What's Included:
- StopTech 07-08 Audi RS4 Replacement Right Drilled 325x22mm Aero Rotor
Vehicle Fitment:
- 2003 Audi RS6 Base
- 2007-2008 Audi RS4 Base
- 2008-2008 Audi RS4 Cabriolet
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
StopTech AeroRotor Replacement Kits ARK are designed to replace your vehicle's original factory rotors; while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors; it offers improved cooling; braking; and handling. The directional; floating AeroRotors allow independent expansion of the rotor and hat without "coning;" thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design; pre-assembled to billet aluminum AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80 percent more air than factory rotors for better cooling and reduced fade on the track. The aircraft-grade aluminum hats and 2-piece AeroRotors are up to 8 pounds lighter than stock rotors; allowing faster acceleration and deceleration; and improved handling. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat; friction material and debris; assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion; zinc finish is available for customers in cold climates; where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100 percent made in the USA.
Reduced Unsprung and Rotational Mass. Improved Thermal Capabilities. Optimized Heat Dissipation. Designed to Work with OE Calipers
Reduced Unsprung and Rotational Mass; Improved Thermal Capabilities; Optimized Heat Dissipation; Designed to Work with OE Calipers
What's Included:
- StopTech 07-08 Audi RS4 Replacement Right Drilled 325x22mm Aero Rotor
Vehicle Fitment:
- 2003 Audi RS6 Base
- 2007-2008 Audi RS4 Base
- 2008-2008 Audi RS4 Cabriolet
